måndag, mars 16, 2009

 

How I succeeded to configure Pidgin to work with our Office Communications Server

Since it was a real hassle to figure out these settings I decided to note them here for future references. Since I didn't find this variant of the Pidgin+SIPE+LCS configuration anywhere else, it may be useful for others too.

While talking to others using Pidgin + LCS I noticed the configuration may differ depending on your setup, i.e. internal only or external LCS / SIP server.
At work we use an internal only LCS server which is only listening on its default TCP port (5060).
Below you can see that I need to enter domain + username in the auth* fields. I know others that don't use these fields in their setup, but they do have an externally accessible (over TLS/SSL, port 443) LCS / SIP server.
So be prepared, your result may vary :).


  1. Download Pidgin (v2.5.5 in my case)
  2. Download SIPE (v1.3.3, libsipe.dll, precompiled dist for Windows)
  3. Put libsipe.dll in the plugins directory of Pidgin
  4. Go to Accounts -> Manage Accounts
  5. Choose Add..
  6. Enter the following settings.

    Tab: Basic
    Protocol = Microsoft LCS/OCS
    Username = <your SIP address in Active Directory is your primary e-mail address>
    Password = <your Active Directory password>


    Tab: Advanced
    Use Proxy = Checked
    Proxy Server = <the FQDN of your LCS server, i.e. mylcs.corp.local>
    Use non-standard port = Checked
    Port = 5060
    Connection Type = TCP
    Auth User = <your Active Directory username>
    Auth Domain = <your Active Directory domain name in dotted form, i.e. corp.local>

  7. Click Save and you should see your LCS contacts appearing in the Buddy List of Pidgin


All Done!

Kommentarer:
Finally!!! Now I can replace my corporate Windows Messenger with lovely Pidgin. I only should say that in my case no proxy must be chosen since we do not use it for authorization.
Tack!! ;)
 
Thanks a million for putting this together, works perfectly with OCS 2007 even. One additional step I had to do was "fake" the user agent to this: "UCCP/2.0.6362.0 OC/2.0.6362.0 (Microsoft Office Communicator)" to be able to log in to the server, otherwise flawless.
 
Skicka en kommentar

Prenumerera på Kommentarer till inlägget [Atom]





<< Startsida

Prenumerera på Inlägg [Atom]